Technics ST-G30L Manuel D'utilisation page 15

01 Standby/on switch (Í/I)
≥ Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
02 Power indicator
≥ Blue: The unit is on.
03 STATUS indicator
This is a two-color LED indicator that shows the SSD status.
≥ It flashes blue when this unit is on.
OFF
Lights up (blue)
Lights up (red)
Flashing (red)
04 CD indicator
This is a two-color LED indicator that shows the CD status.
≥ It flashes blue when you insert a CD into this unit.
OFF
Lights up (blue)
Lights up (red)
Flashing (red)
05 CD tray
06 Opens/closes the CD tray
≥ The tray opens or closes after the CD indicator flashes.
07 Network connection indicator
OFF
Lights up (yellow)
Flashing (yellow)
08 LAN terminal ( 18, 19)
09 Network communication speed indicator
OFF
Lights up (Orange)
Lights up (green)
10 USB terminal ( DC 5 V 500 mA AUDIO OUT) (
≥ Connects to a device with a built-in USB-DAC.
11 USB terminal ( DC 5 V 900 mA IMPORT/BACKUP) (
≥ Connects to a USB memory device or USB HDD (Hard Disk Drive).
12 Storage tray (STORAGE)
≥ You can remove the tray to attach and remove the SSD. (
13 Fixing screw
14 Product identification marking
15 AC IN terminal ( ) (
No SSD ( 12, 13)
Possible to access SSD
Importing from USB / Downloading from
Technics Tracks / Backing up / Restoring
The SSD is not formatted
No CD
Possible to access the CD
Recording CD music
Incompatible CD
Disconnected
Connected
Making a connection
Disconnected/10 Mbps connection
100 Mbps connection
1 Gbps connection
18, 19)
Control reference guide
22)
21)
12, 13)
15
(15)