Sony KV-HR36 Mode D'emploi page 7

Step 2
Connect the antenna
If you wish to connect a VCR, see the "Connect a VCR" diagram on page 8.
Antenna cable with filter
(not supplied)
or
Antenna cable with filter
(not supplied)
: Signal flow
For optimum Performance
To connect the TV to the antenna or the VCR, use an antenna cable
with filter (not supplied).
Note that one end of the cable has a male plug fitted while the other
end is fitted with a female socket. Connect the male plug to the
(antenna) terminal of the TV.
CAUTION
Do not connect the power cord until all other connections are complete;
otherwise, a minimal current leakage through the antenna and/or other
terminals to the ground could occur.
Rear of TV
continued
Using Your New TV
7