Sony KV-HR36 Mode D'emploi page 35

When receiving an A2 (German) program
Broadcasting
A2 (German) stereo
A2 (German) bilingual
Receiving area for NICAM and A2 (German) programs
System
NICAM
A2 (German)
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select
• Before receiving a NICAM stereo program in China, please check the
If the sound is distorted or noisy when receiving a monaural
program through the 8 (antenna) terminal
Press A/B repeatedly until "Mono" appears on the screen.
To cancel the monaural sound setting, press A/B again until "Auto"
appears on the screen.
Notes
• The "Mono" or "Auto" setting is memorized for each program position.
• You cannot receive a stereo broadcast signal when the TV is in the "Mono"
On-screen display (Selected sound)
Receiving area
Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.
Australia, Malaysia, Thailand, etc.
"Mono". The sound becomes monaural, but the noise is reduced.
NICAM broadcast condition at your area. When receiving a NICAM
stereo program, the receiving conditions might vary depending on area. In
addition, different strength of the NICAM broadcast signal might affect
the receiving quality.
Mono
setting. Normally, set the TV to "Auto".
Mono
(Regular sound)
Main
(Main sound)
Auto
Stereo
(Stereo sound)
Sub
(Sub sound)
Advanced Operations
35