WRC Kwadoo 2R Manuel D'utilisation page 6

USER GUIDE
Robot cleaner with water jet propulsion
Quadri Jets system (patented)
Be sure that the electrical outlet to connect the robot is connected to a 30 mA max.
differential current protection device
Position the control box 3.5 metres minimum from the edge of the pool
Do not swim when the robot is present in the pool.
The robot and control box run on a 24V voltage supplied by a moulded and
sealed 220V/24V transformer
1 INSTALLATION
Get out the device from its cardboard packaging and check its state after transport.
The cardboard include the robot, the control box and the trolley (in options)
Never lift the robot by the cable.
Only use the handles to manipulate the robot.
2 SPECIAL OPERATING FEATURE
This cleaner is designed for operation in pools with flat or gently sloping bottom, for all kind
of shape and all kind of covers.
The automatic system uses programs adapted for pools as far as 15 meters long.
A complete cleaning cycle takes between 1h30 (pool of 6m long) and 2h30 (pool of 15m long)
A security system prevents the use of the robot out of the water. The end of a cleaning cycle
or a press of the power button will switch off the device.
SAFETY