Drive Unit - WMF Lineo Mode D'emploi

Drive unit

Operator control panel
You can set the speed of the high-performance motor at one of 5 levels using the
selector switch on the drive unit (6).
The motor will operate at maximum speed for as long as you keep the selector
switch on the pulse level. This is particularly useful for further blending before
pouring out the contents.
Attention: it is only possible to switch the mixer on if the glass jar (3) is fitted
correctly. A safety shutdown feature ensures the device cannot be used without
the glass jar (3).
Ice crusher
You can use the Ice crush button to crush ice cubes easily. Fill with a maximum
of 8 ice cubes and close the glass jar with the lid (2) and cap (1). Set the selector
switch to the Prog position, the Ice crush and Interval buttons now illuminate.
Now press the Ice crush button. The mixer starts an automatic program with
various speed settings and pauses, while the programme is active, only the Ice
crush button will illuminate.
The program ends automatically, both the Ice crush and Interval buttons now
illuminate again. .
You can end the program at any time by pressing the Ice crush button.
Interval
The Interval function is ideal for preparing smoothies, milkshakes or cocktails.
You can also use the Interval button to clean the glass jar (3). Fill the glass jar (3)
with a maximum of 1 l of clean water and squeeze in a few drops of washing-up
liquid.
Set the selector switch to the Prog position, the Ice crush and Interval buttons
now illuminate. Now press the Interval button. The mixer starts an automatic
program with various speed settings and pauses, while the programme is active,
only the Interval button will illuminate.
12