Socket For Power Tool - FIORENTINI K17E1P-D Mode D'emploi

EN

3.5 Socket for power tool*

The appliance can be equipped with the
synchronous power tool socket function.
Switch the vacuum cleaner and power tool off.
Connect the electric plug of the power tool to the
socket on the vacuum cleaner head.
Connect the power tool dust outlet to the
appliance's vacuum pipe, using the special
adapter.
Switch the appliance on with switch on position II
or on the power tool symbol.
Switch the power tool on. The vacuum motor starts
when the connected electrical device is switched
on.
After the electrical appliance has been switched
off, the vacuum cleaner will continue to operate for
a short time, so that the dust which is still in the
vacuum pipe is conveyed into the collection drum.
The vacuum cleaner is switched on and off via the
connected electrical device. Dirt is absorbed
directly in the dust formation point.
6
WARNING
Only dust generators tested for this
technique can be connected.
For the maximum power consumption of
the connected electrical appliance please
refer to the technical specifications table.
Before placing the switch in the "auto"
position, make sure that the connected
electrical appliance is switched off.
*Optional feature depending on the model.