VQ OrthoCare BioniCare Knee System Manuel D'utilisation page 17

5. Settings Menu Screen
NOTE: This display can only be accessed when amplitude is 0 Volts
Display Settings
Language, Screen Orientation, Color and Brightness
Time Settings
Calendar Settings
Understanding Special Display Messages
Special messages may appear on the display screen during use to report a
low battery condition or other operational conditions that require attention.
Low Battery: When the device determines the battery is approaching the end
of its usable charge, the device will continue to operate but the battery icon
on the main display screen will flash and audible beep will sound. When
this occurs, recharge the battery or replace it with a freshly charged battery.
Open (circuit): An "Open" circuit message will be displayed and an audible
beep will sound if 1) the lead wire is disconnected from the generator
("Open" does not flash in this case) or 2) an electrode either loses skin
contact or the wire is disconnected ("Open" will flash in these cases).
Advance Device Functions
The BioniCare Generator has data recording and Bluetooth communication
capabilities to allow it to capture patient data input and transmit it
automatically to the BioniCare website. The patient can then access the
website to see their progress. For information and instructions for the
website, go to www.BioniCare.com.
BioniCare Knee System
®
General Settings
Progress Survey Questions, Clock Format,
Time Zone, Audible and Idle Mode Settings
Bluetooth Connection
Technician Settings
ENGLISH | 15