AEG IKB64411XB Notice D'utilisation page 12

Masquer les pouces Voir aussi pour IKB64411XB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12
www.aeg.com
5.10 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
Touch
for 4 seconds.
Deactivate the hob with
To deactivate the function: activate the
hob with
Touch
for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds. You
can operate the hob. When you
deactivate the hob with
operates again.
5.11 OffSound Control
(Deactivating and activating
the sounds)
Deactivate the hob. Touch
seconds. The display comes on and goes
out. Touch
comes on. Touch
choose one of the following:
- the sounds are off
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
5.12 Power management
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
. Do not set the heat setting.
comes on.
.
. Do not set the heat setting.
comes on.
.
for 4 seconds.
the function
for 3
for 3 seconds.
of the timer to
you can
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones alternates between
the chosen heat setting and the
reduced heat setting. After some time
the heat setting display of the
.
reduced zones stays on the reduced
heat setting.
or
5.13 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infra — red signal communicator.
Speed of the fan is defined automatically
on basis of mode setting and
temperature of the hottest cookware on
the hob. You can also operate the fan
from the hob manually.
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 – H6. The hob
is originally set to H5. The hood reacts
For most of the hoods the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer
to hood user manual.

Publicité

Table des Matières
loading

Table des Matières