LENCO BT-130 Guide D'utilisation page 13

OTS80 BK3254 BT_AUX_20170919_r0_draft for MK
Power Source Input
Audio
I/O
Operating Temperature 0 to 40°C
R. Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from
the description made in this manual.
S. Guarantee
Lenco offers service and warranty in accordance to European law, which
means that in case of repairs (both during and after the warranty period)
you should contact your local dealer.
Important note: it is not possible to send products that need repairs to
Lenco directly.
Important note: if this unit is opened or accessed by a non-official service
center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use,
all warranty obligations of the manufacturer will be voided.
T. DISCLAIMER
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from
the description made in this manual.
Micro USB Port
PC's USB port Power or DC 5V, 1000mA
Output Power
Freq. Responses:
Audio in link
13
2X3W RMS
60Hz ~ 16000Hz
800mV RMS (10K Ohm)