Gewiss R-EVolution Parking+ GW68105 Manuel D'installation Et Usage page 25

Communication accessories
2. To install the JP1 jumper in the end stations, access its control card. On these stations uninstall the six
bolts indicated in the following figure and remove the front.
3. Install JP1 jumper on the control card of the end charging stations.
J P 1
Jumper JP1 uninstalled (intermediate stations)
ABA2022IQM01_ - 7.55.4.183.9 - Installation and Operation Manual
J P 1
Jumper JP1 installed (stations at the two ends)
Gewiss
EN
ES
FR
IT
25