Optional Accessories - AKG MicroMic III Série Mode D'emploi

1 Description
1.5 Versions
C 419
III
C 419
1.6 Optional
Accessories
16
gooseneck allows you to align the microphone
precisely as required. A frequency-independent
hypercardioid polar pattern provides high gain-
before-feedback and reduces spillover from
neighboring instruments to a minimum. The trans-
ducer is suspended in a dedicated shock mount
for maximum suppression of handling noise. A
built-in windscreen reduces wind and blowing
noise and an external windscreen for additional
wind noise attenuation is included with the micro-
phone.
The C 419
PP: • With 3-pin XLR connector with integrated ad-
apter for 9 to 52 V universal phantom power.
L: • With locking mini XLR connector for use with
III
the B 29 L battery power supply, MPA III L
phantom power adapter, or AKG bodypack
transmitters.
is available in two versions:
III
• MK 9/10 microphone cable: 10-m
(30-ft.) 2-conductor shielded cable
w/male and female XLR connectors
• MPA III L phantom power adapter
• B 29 L, B15 battery power
supplies
• N 62 E, N 66 E,
B 18 phantom
power suppplies