Troubleshooting; Disposal - Tetra EasyCrystal FilterBox 600 Mode D'emploi

Cleaning the EasyCrystal FilterBox
Procedure:
Fig. H
1. Dismantle the device in the sequence shown in the diagram.
– Clean soiled parts with water or a special cleaner for
aquariums. Other cleaning products may harm the crea-
tures and plants in the aquarium.
– Check the BioGrid. If it is clogged up, it should ideally be
washed in skimmed aquarium water to retain beneficial
bacteria.
2. Reassemble the device in reverse order.

TROUBLESHOOTING

If you are unable to rectify any faults yourself, contact your local
retailer or Tetra Customer Service.
Malfunction
Pump will not operate Pump is not receiving
Pump is making
unusual noises
Insufficient flow of
water
Water is cloudy or
dirty

DISPOSAL

The device contains electronic components and cannot be
disposed of with the standard household waste.
• Dispose of the device using the return system for your area
so that the raw materials can be recycled.
• Cut off the connection cable prior to disposal to prevent the
device from being used.
Cause
power
Pump is faulty
Blocked impeller
Pump is clogged up
Pump is clogged up
Pump is faulty
Worn impeller
Filter cartridge used
up
Solution
Connect the power
supply
Contact your retailer
or Tetra Customer
Service
Clean the pump
Clean the pump
Clean the pump
Contact your retailer
or Tetra Customer
Service
Replace impeller
Change the EasyCrys-
tal filter cartridge
UK
11