Using Your Refrigerator; Thermostat Setting Button; Dual Cooling System - Beko RCNA420W Notice D'utilisation

Using your refrigerator

5

Thermostat setting button

The interior temperature of your
refrigerator changes for the following
reasons;
• Seasonal temperatures,
• Frequent opening of the door and
leaving the door open for long periods,
• Food put into the refrigerator without
cooling down to the room temperature,
• The location of the refrigerator in the
room (e.g. exposing to sunlight).
• You may adjust the varying interior
temperature due to such reasons by
using the thermostat.
Operating temperatures are controlled by
the thermostat knob and may be set at
any position between 0 and 5 (the
coldest position).
The average temperature inside the
fridge should be around +5°C (+41°F).
Therefore adjust the thermostat to obtain
the desired temperature. Some sections
of the fridge may be cooler or warmer
(such as salad crisper and top part of the
cabinet) which is quite normal. We
recommend that you check the
temperature periodically with a
thermometer to ensure that the cabinet is
kept to this temperature. Frequent door
openings cause internal temperatures to
rise, so it is advisable to close the door
as soon as possible after use.

Dual cooling system:

Your refrigerator is equipped with two
separate cooling systems to cool the
fresh food compartment and freezer
compartment. Thus, air in the fresh food
compartment and freezer compartment
do not get mixed.
Thanks to these two separate cooling
systems, cooling speed is much higher
than other refrigerators. Odors in the
compartments do not get mixed. Also
additional power saving is provided
since the defrosting is performed
individually.
11
EN