Sony CLIE GEAR Mode D'emploi page 31

5
Tap [Details...] in the bottom left-hand corner of the screen.
The [Wireless LAN Setup] screen appears.
6
Tap V below [Profile Name], and select the profile
name you want to use.
7
Tap [OK].
The [Preferences] screen appears again.
8
Tap [Connect] at the bottom of the screen.
Your CLIÉ handheld begins to connect to a Wireless LAN.
When a connection is established, start up the application you like.
Note
In the Ad-hoc mode, your CLIÉ handheld waits for a reaction from the selected
device. If the selected device is out of connectable range, or a setting above is
wrong (e.g. the setting for IP Address, SSID, or WEP is wrong), [Connected] is
displayed on the screen of your CLIÉ handheld.
US
31