First Use; Daily Use - Kuppersbusch IKEF2480-0 Notice D'utilisation

When changing the temperature setting
wait about 24 hours until the temperature
display has stabilised.
Temperature regulation
To operate the appliance, proceed as fol-
lows:
1. Set the required temperature by press-
ing the corresponding temperature regu-
lator. The temperature indicator will im-
mediately show the changed setting (DE-
SIRED temperature) and the tempera-
ture indicator flashes.
2. Each time the temperature regulator is
pressed the DESIRED temperature is ad-
justed by 1 °C. The DESIRED tempera-
ture must be reached within 24 hours.
3. Once the required temperature has
been set, after a short period (approx. 5
sec.) the temperature indicator will show
again the current ACTUAL temperature
inside the corresponding compartment.
The temperature indicator will change
from flashing to continuous illumination.
For a correct storage of the food the follow-
ing temperature should be set:

First use

Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accesso-
ries with lukewarm water and some neutral
soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.

Daily use

Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
For better use of space, the front half-
shelves can lie over the rear ones.
• +5 °C in the fridge
Important! When the setting is changed,
the compressor does not start immediately
if automatic defrosting is currently taking
place. As the storage temperature within
the fridge is reached quickly you can store
food immediately after switching on.
Supercool function
The Supercool function is suited for quick
cooling of large quantities of goods in the re-
frigerator.
To activate the function, do these steps:
1. Press the Supercool button.
2. The Supercool indicator switches on.
The Supercool function now provides for in-
tensive cooling.
The Supercool function is ended automati-
cally after a period of 6 hours.
You can deactivate the function at any time:
1. Press the Supercool button.
2. The Supercool indicator switches off.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
17