Electrolux ST281F Notice D'utilisation page 75

Masquer les pouces Voir aussi pour ST281F:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.5 Door reversibility
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
Empty the appliance.
1. Make sure the appliance stands
upright.
2. Open both doors and remove the
door equipment. Refer to "Daily Use"
chapter. Close the doors.
3. Use a thin-blade screwdriver to
remove the screw hole cover (A) and
the upper hinge cover (B). Put them
aside.
A
4. Unscrew the screws of the right
upper hinge. Support the upper door
with your hand. Remove the upper
hinge, reverse it, screw the screws
and the pin to it. Put the hinge aside.
5. Carefully lift the upper door from the
6. Unscrew the screw (B) and the "stop
7. Unscrew the screws from the middle
Be careful not to lose washers that may
B
stick to the door.
8. Place the lower door on the soft
9. Unscrew the screw (B) and the "stop
1
2
middle hinge to remove it. Place the
upper door on the soft surface. Be
careful not to lose washers that may
stick to the door.
block" (A) and screw them on the
opposite side of the door.
A
B
hinge. Remove the middle hinge and
put it aside together with the screws.
surface.
block" (A) and screw them on the
opposite side of the door.
ENGLISH
75
3
1
3
2

Publicité

Table des Matières
loading

Table des Matières