Replacing G The Fuse; Technica Al Specific Cations - EuroLite N-11 Mode D'emploi

The EUROLITE smoke fluids we recommend are non-hazardous to the environment and can be disposed of
via the sewage system.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by a special power supply
cable available at your dealer.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Smoke output:
Warm-up time:
Output volume:
Tank capacity:
Fuse:
Dimensions (LxWxH):
Weight:
Accessories:
EUROLITE Smoke fluid -B- Basic, 5l
EUROLITE Smoke fluid -C- standard, 5l
EUROLITE Smoke fluid -P- professional,5l
Smoke machine cleaner, 1L
14 fragrances set for smoke fluid
Safety bond AG-5 3x600mm up to 5kg
D-5 Hazer fluid 5 liters
Fog fragrance set with all 14 types
Smoke machine cleaner, 1L
TPC-10 Coupler, silver
AG-5 3x600mm Safety bond up to 5kg
Please note: Every information is subject to change without prior notice. 17.06.2015 ©
230 V AC, 50 Hz ~
400 W
2 m
approx. 5 min.
14 m³/min.
0.3 l
F 4 A, 250 V
265 x 145 x 170 mm
1.7 kg
No.
51704199
51704203
51704210
51704325
51704355
5170435A
51704370
51704655
51704592
59006856
58010360
18/25
00089340.DOCX, Version 1.1