Electrolux ESI5510LAX Notice D'utilisation page 11

How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and Start
until the indicators
and start to flash and the display is
blank.
2. Press Option.
• The indicators
off.
• The indicator
to flash.
• The display shows the current
setting.
– = rinse aid dispenser
activated.
– = rinse aid dispenser
deactivated.
3. Press Option to change the setting.
4. Press the on/off button to confirm the
setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode press and
hold simultaneously Delay and Start
2. Press Delay
,
and go
3. Press Delay to change the setting.
4. Press the on/off button to confirm the
continues
6.5 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
You can also set applicable options
together with the programme.
2. Press and hold simultaneously
How to set the MyFavourite
programme
Press and hold Program until the
indicators that are related to the
MyFavourite programme and options
come on.
The display shows the duration of the
programme.
until the indicators
and start to flash and the display is
blank.
• The indicators
go off.
• The indicator
• The display shows the current
setting:
– = Acoustic signal off.
– = Acoustic signal on.
setting.
save
Program and Delay until the
indicators of the programme and the
options flash for a few seconds.
11
ENGLISH
,
and
continues to flash.