Programming Instructions - Fracarro SIG7710 Instructions D'emploi

The SIG7710 module programming is carried out in  consecutive steps:
1. using the universal TPE programmer, to select mainly the network parameter (IP, NETMASK, GA-
TEWAY, etc) refer to the user's instructions of the universal programmer and the SIG7710 GENERAL refer to the user's instructions of the universal programmer and the SIG7710 GENERAL
MENU;
01
HEAD
Line
Freq. In 1204
Lev Out 15
FRACARRO
2. though the local connection between the module and PC. To carry out the local connection to
the module and enter all the configurations through the integrated web-browser interface, use a PC
with a network adapter (Ethernet card) and an Ethernet CAT-5E crossover cable – refer to the PRO-
GRAMMING INSTRUCTIONS – SIG7710 WEB MANAGEMENT PROCEDURE).
01
HEAD
Line

5. PROGRAMMING INSTRUCTIONS

to select mainly the network parameter (IP, NETMASK, GA-
PENTA85
CHVU4ZN
FR
DFP85
SIG7901
PENTA85
CHVU4ZN
FR
DFP85
SIG7901
8
KPR41
SAT SAT SAT SAT SAT SAT
SIG7710 SIG7710 SIG7710 SIG7710 SIG7710 SIG7710
HEAD-Line HEAD-Line HEAD-Line HEAD-Line HEAD-Line HEAD-Line
IP IP IP IP IP IP
SIG7710
KPR41
SAT SAT SAT SAT SAT SAT
SIG7710 SIG7710 SIG7710 SIG7710 SIG7710 SIG7710
HEAD-Line HEAD-Line HEAD-Line HEAD-Line HEAD-Line HEAD-Line
IP IP IP IP IP IP
SIG7710
PC