Setting The O-Ring - Panasonic LUMIX DMW-MCTZ40 Manuel D'utilisation

Setting the O-ring

Be sure to set the O-ring before attaching a digital camera.
Thoroughly wash and dry your hands before handling the O-ring. Place
the O-ring where there is no sand or dust.
1
Loosen the O-ring with your fingers to remove it.
•
Loosen part of the O-ring with the tips of two fingers and then lift the
loosened part. Be careful not to scratch the O-ring with your fingernails.
Note
•
Do not use a pointed object to remove the O-ring. This may scratch or damage the
O-ring.
8
VQT4V81 (ENG)
O-ring
O-ring