Genesis GLMT12 Manuel D'utilisation page 2

12V Multi-Purpose Oscillating Tool
Operator's Manual
Specifications:
• Model: GLMT12
• Input: 12V DC
• Charger input: 120V~/ 60hz
• Charger output: 13.6V DC, 1 A.
• No Load Speed: 20,000 OPM
• Battery Type: Lithium-Ion
• Battery Capacity: 1300 mAh
• Recharging Time: 75 Minutes
Includes: Battery, Charger, 3" Delta sanding pad, (3) Sanding triangles, Rigid scraper blade, 30mm
Flush cut (E-Cut) saw blade, HSS segmented saw blade, Allen wrench and Accessory storage case
Warning:
this operator's manual before operating this tool. Save this Manual for future
reference.
Toll-Free Help Line: 1-888-552-8665
WEAR yOuR
SAFETy GLASSES
FORESIGHT IS BETTER
THAN NO SIGHT
Look for this symbol to point out important safety
precautions. it means attention!!! Your safety is
involved.
gEnEraL SaFETY rULES
Warning:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
12V Multi-Purpose Oscillating Tool
Operator's Manual
To reduce the risk of injury, user must read and understand
Warning:
objects being thrown into your eyes, which can result in severe eye damage.
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields. Always wear eye protection which is marked to comply with ANSI
Z87.1.
The Operation of any power tool can result in foreign
GLMT12