Publicité
Les langues disponibles
Les langues disponibles
CONTROL PANEL
LOW
HIGH
Low
High
Fig.1
CONTROL PANEL BUTTONS INTRODUCTION
Put the plug into the power socket.
●
The heater has two power ranges: 600W and 1200W.
●
Turn control knob to left without oscillation function: LOW(600W) or HIGH(1200W).
●
Turn control knob to right with oscillation function :
●
(oscillation+1200W).
Fig 2 is the angle knob with two angle modes: 120° and 360°. When using the oscillation
●
function, turn angle knob to left 120° and turn right 360°.
Switch the heater off by turning control knob to OFF-position.
●
Remove the plug from the power socket.
●
CLEANING AND MAINTENANCE
Always disconnect the appliance and let it cool down completely before carrying out any
●
maintenance.
Use a vacuum cleaner to remove dust on inlet and outlet surfaces.
●
Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never
●
immerse the unit in water, nor let water drip into the unit.
600W
1200W
OSC+600W
OSC+1200W
(oscillation+600W) or
Low
STORING
Always disconnect the appliance, let it completely cool and clean it before storing.
●
If you do not use the device for a long period, put back the unit and the instruction manual
●
back into the original carton and store in a dry and ventilated place.
Do not place any heavy items on top of carton during storage as this may damage the
●
appliance.
Fig.2
High
36 | 37
GB
Publicité
