Section 9 − Accessoires/Consommables - Hobart Handler 190 Manuel De L'utilisateur

SECTION 9 − ACCESSOIRES/CONSOMMABLES
9-1. Accessoires
Part No.
194 776
195 186
245 926
300 796
221 037**
770 198*
237 702**
*Available at farm and tool supply retailers.
** Available at Hobart/Miller welding distributors.
9-2. Consommables
Item
Contact Tips
.023/.025 in. (0.6 mm)
.030 in. (0.8 mm)
.035 in. (0.9 mm)
.045 in. (1.2 mm)
MIG Nozzle (Standard)
Gasless Flux Cored Nozzle
Tip Adapter
Replacement Liners
.023/.025 in. (0.6 mm)
.030/.035 in. (0.8/0.9 mm)
.035/.045 in. (0.9/1.2 mm)
Replacement Drive Rolls
.023/.025 in. (0.6 mm) and
.030/.035 in. (0.8/ 0.9 mm)
V and VK Groove
.030/.035 in. (0.8/ 0.9 mm)
and .045 in. (1.2 mm)
VK Groove
*Available at farm and tool supply retailers.
** Available at Hobart/Miller welding distributors.
.
A complete Parts List is available on-line at www.HobartWelders.com
To maintain the factory original performance of your equipment, use only Manufacturer's Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
OM-260273 Page 30
Description
Small Running Gear/Cylinder Rack
Protective Cover
H100S4−10 Replacement Gun
SpoolRunner 100 Spool Gun
Regulator/Flowmeter
Regulator/Flowmeter
Hobart Package Part No.*
770 174 (5 per package)
770 177 (5 per package)
770 180 (5 per package)
770 183 (5 per package)
770 404
770 487
770 402
196 139
196 139
196 140
261 157
202 926
For One Small Gas Cylinder, 75 lb (34 kg) max.
10 ft length/.030−.035 wire size
For push/pull wire feeding
For Argon and Argon mixed shielding gas. Use
with replacement hose 269 815.
For CO shielding gas. Use with replacement gas
2
Miller Package Part No. **
087 299 (10 per package)
000 067 (10 per package)
000 068 (10 per package)
000 069 (10 per package)
For All Feed Head Assemblies
Remarks
Weatherproof Nylon
hose 144 108.
169 715
226 190
169 716
194 010
194 011
194 012
261 157
202 926