Specifications - Sharp PN-L401C Manuel D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Model
Power requirement
Operating temperature *
Operating humidity
Power consumption (Maximum)
Dimensions (excluding protrusions) inch (mm) Approx. 36-15/16 (W) x 2-9/16 (D) x 21-1/2 (H) (939 x 65 x 546)
Weight
* When using the monitor laying flat on a surface (when the monitor is tilted more than 20 degrees upward from the perpendicular in relation to
a level surface), use the monitor at a temperature between 41°F (5°C) and 86°F (30°C).
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases,
please check the temperature condition specified by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
8
E

Specifications

PN-L401C
AC 100 V - 240 V, 1.0 A, 50/60 Hz
41°F to 95°F (5°C to 35°C)
20% to 80% (no condensation)
89 W
lbs. (kg) Approx. 38.6 (17.5)

Publicité

Table des Matières
loading

Table des Matières