Quick Reference; Supplied Accessories; Attaching/Detaching The Stand - Sharp LC-42SV49U Mode D'emploi

QUICK REFERENCE

Supplied Accessories

Make sure the following accessories are provided with the product.
Remote control unit
(
1)
X
Page 11
Stand (
1)
X
with Screws
Page 8
• Always use the AC cord supplied with the TV.
• The illustrations above are for explanation purposes and may vary slightly from the
actual accessories.

Attaching/Detaching the Stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT
terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will
prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result
in the TV falling over.
1. Put the TV face down on a safe surface that is covered by a soft and smooth cloth.
2. Adjust the TV stand to the bottom of the TV.
3. Fasten the screws by using a cross-head screwdriver (Not supplied).
CAUTION
• Do not push too hard or put excessive pressure
to the stand neck to avoid the damages when
you turn the TV for the most comfortable
viewing angle.
• To detach the stand, perform the steps in reverse
order.
8
"AAA" size battery
x4
Operation manual
(
2)
X
Page 13
(
1)
X
3
AC cord
(
1)
X
Page 10
2