Kuppersbusch IKE 160-2T Instructions De Montage Et D'emploi page 26

GB
Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha). Put
together the appliance door and the furniture door
and mark the holes as indicated in the figure.
Remove the squares and mark a distance of 8 mm
from the outer edge of the door where the nail must
be fitted (K).
26
8.
10. Place the small square on the guide again and
fix it with the screws supplied.
Should the alignment of the furniture door be
necessary, use the clearance of slots.
At the end of this procedure, it is necessary to
9. check if the door of the furniture closes
properly.
11. Fix cover (Hd) on the small square (Hb) until it
clips into place.