Setup; Step 1: Connect The Display To Your Computer - Sony SDM-M51D Mode D'emploi

Setup

Before using your monitor, check that the following items are
included in your carton:
• LCD display
• Power cord
• AC adapter
• DVI-HD15 (analog RGB) video signal cable
• Audio cord (stereo miniplug)
• Cord clip (2)
• Macintosh adapter
• Windows Monitor Information/Windows Utility/Macintosh
Utility Disk
• Warranty card
• Notes for Macintosh users
• This instruction manual
Step 1: Connect the display to your
computer
Turn off the monitor and computer before connecting.
If you connect the monitor to a computer equipped with a DVI
(digital RGB) output connector that complies with DVI Rev. 1.0,
use a DVI-DVI (digital RGB) video signal cable (not supplied).
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
x Connecting to an IBM PC/AT or compatible
computer
to VIDEO output
IBM PC/AT or
compatible computer
DVI-HD15 (analog RGB) video
signal cable (supplied)
x Connecting to a Macintosh
Use the supplied Macintosh adapter.
Macintosh adapter
(supplied)*
to video output
Macintosh
* Refer to the supplied "Notes for Macintosh users" for further details.
DVI-HD15 (analog
RGB) video signal cable
(supplied)
GB
(continued)
7