König SAS-ASRC4 Série Manuel De L'utilisateur page 4

SAS-ASRC4xx - QIG
Remote control
Description
1. DELAY ARM: the alarm is armed after 30 seconds
2. DISARM: the alarm is disarmed and the siren is silenced immediately
3. ARM: the alarm is armed immediately
4. SOS: the siren sounds immediately
5. LED indicator
Pairing the motion detector to the main unit
1. Long press the arm button on the main unit (4 LEDs light up).
2. Press any button on the remote control.
a. Two flashes and two tones indicate successful pairing.
b. Single flash and tone indicate failed pairing.
c. Three flashes and tones indicate no more remotes can be added
Technical data
Power supply:
Current:
Transmission range:
Frequency:
Operating temperature:
Relative humidity:
Dimensions:
3 VDC CR2032 (included)
< 15 mA
up to 80 m
433 MHz
-10 °C ~ +55 °C
< 80% (non-condensing)
66 x 32 x 12 mm
4