Warranty; Environmental Protection; Specifications; Manufacturer And Aftersales Service Address - HEBU medical GOLD II Accu Autopsie Mode D'emploi

EN

12 Warranty

We provide a guarantee for HEBU cast cutting saws in accordance with statutory and country-
specific legislation (proof of purchase by invoice or delivery note). The minimum warranty period
is 18 months. In the event of material or production defects, we provide free repair of the device.
Any attempt to carry out unauthorized repairs will result in forfeiture of your warranty cover.
Damage caused by incorrect handling, overloading or normal wear and tear is not covered by
the warranty. Please contact our aftersales service department.
In case of warranty claims and repairs, please enclose a copy of the invoice or delivery note
with the device.

13 Environmental protection

Any packaging materials, disused devices and accessories must be sent for
environmentally friendly recycling or disposal. Electrical devices may not be
disposed of with the household waste but taken to the local disposal and
recycling facility for electrical devices. For more information on this subject,
consult your specialist dealer.

14 Specifications

Model
Power supply – Charger connector
Current type
Oscillations
Weight
Protection class
IP Code
Noise level (A-graded)
Hand-arm vibration

15 Manufacturer and aftersales service address

HEBU medical GmbH
Badstraße 8
78532 Tuttlingen
Germany
+49 74 61 / 94 71 – 0
Tel:
+49 74 61 / 94 71 – 22
Fax:
eMail: service@HEBUmedical.de
Web: www.HEBUmedical.de
30
Oszillo-saw GOLD II accu autopsy
HB 8871
220-240Volt 50/60Hz
+ 14,4 DC
-1
11000-18000 min
Accumulator: 680 g
1,8 kg
III
IP2X
Typically 65-75 dB (A).
The noise level during sawing can exceed 85 dB (A).
From 85 dB (A), wear ear protectors!
Typically lower than 2.5 m/s
Measured values determined in accordance with EN 50
144.
HB 8871V
100-120 Volt 50/60Hz
Saw: 1,12kg Total weight:
2
.