Connecting The Speakers - Yamaha NS-P285 Mode D'emploi

Caution: Make sure the power cables for the subwoofer and your other AV components are disconnected from the
AC wall outlets before making any connections.
Connection diagram
Surround speakers
Right Left
Subwoofer
To AC wall outlet
■ Preparing the speaker cables
Once you've positioned the speakers, you'll need to cut
the 25-meter (82 ft.) speaker cable to make five cables
for connecting the two front speakers, center speaker,
and the two surround speakers.
1
Cut the included speaker cable to suitable
lengths for the front, center, and surround
speakers. You need five cables.
2
Remove about 10 mm (3/8") of insulation from
the end of each speaker cable.
3
En

Connecting the speakers

SURROUND CENTER
SUBWOOFER
Right
Front speakers
SPEAKERS
FRONT
HDMI OUT (BD/DVD)
HDMI 1
COMPONENT
VIDEO
P R P R
P B P B
Y Y
MONITOR OUT COMPONENT VIDEO
VIDEO
OPTICAL COAXIAL COAXIAL
(CD)
Left
3
Twist the bare wires tightly.
10 mm (3/8")
Good
Notes
• Make the speaker cables as short as possible. Do not
bundle or roll up excess cable.
• Twist the bare wires tightly so the individual strands
are not splayed.
• Be careful not to injure yourself while preparing the
speaker cables.
Center speaker
Amplifier
ANTENNA
HDMI 2 HDMI 3 HDMI 4
FM GND AM
SPEAKERS
FRONT
SURROUND CENTER
MONITOR OUT
OPTICAL
AV AUDIO
( TV ) OUT OUT SUBWOOFER
Note: The exact layout of
the speaker terminals
depends on your amplifier.
No Good