Télécharger Imprimer la page

Velleman VTLAMP2WN Notice D'emploi page 3

Masquer les pouces Voir aussi pour VTLAMP2WN:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

VTLAMP2WN / VTLAMP2BN – LAMP WITH MAGNIFYING GLASS
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries or lamps) as unsorted municipal waste; it should be taken to a
specialised company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VTLAMP2WN / VTLAMP2BN! Please read the manual thoroughly before bringing this device
into service. If the device was damaged in transit, don't install or use it and contact your dealer.
2. Contents and Assembly
1. Take the lamp and the clamp out of the packaging.
2. Secure the clamp (#1) tightly to a solid surface capable of carrying it.
3. Remove screw #2 from the clamp (#1).
4. Insert the stem (#3) into the clamp and secure it by fastening screw #2.
5. Insert the power plug (#4) into a power outlet.
6. Switch the lamp on by means of the switch #5.
3. Replace the Lamp
Unplug the device and let the circular fluorescent lamp cool down before replacing it.
The lamp (#6) is located behind a plastic diffuser (#7) and is held in place by three metal clamps.
1. Remove all screws that hold the plastic diffuser in place and gently remove the diffuser.
2. Carefully take the defective lamp from the clamps and remove it.
3. Install a new lamp (order code LAMP22) by connecting it and securing it in the metal clamps.
4. Put the diffuser back and fasten its screws.
4. Beware
• Never leave the magnifying lens unattended where direct sunlight may pass through it: this creates a fire hazard.
• Use the lamp only indoors. Not suitable for mounting on tubular material.
• If the power cable is damaged, have it only replaced by your dealer to avoid hazard.
• The only user-serviceable part is the lamp. Have a qualified person service the device should it become defective.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
VTLAMP2WN / VTLAMP2BN
3
VELLEMAN

Publicité

loading

Ce manuel est également adapté pour:

Vtlamp2bn