Correct Application; Queries And Technical Problems - Miele professional A 304 Mode D'emploi

en - Correct application
Re-usable laboratory utensils can be reprocessed using this module
in a Miele laboratory washer-disinfector. Follow the instructions for
your washer-disinfector as well as the instructions of the laboratory
utensil manufacturer on how to reprocess their items by machine.
The A 304 injector module is designed for reprocessing centrifuge
tubes, phials, test tubes for fraction collectors and auto-sampler
tubes.
To ensure sufficient water pressure, only one module can be used at
a time in each upper and lower basket. The module must always be
placed in the right hand position. The remaining connections can be
used for other modules.
This module is suitable for use in the following:
– Upper basket A 100
– Lower basket A 150
Laboratory glassware and laboratory utensils for reprocessing are re‐
ferred to as the wash load if they are not more closely defined.

Queries and technical problems

If you have any queries or technical problems that you would like to
discuss please contact Miele. Contact details can be found at the
back of the Operating Instructions for your Washer-Disinfector or go
to www.miele-professional.com.
21