Honeywell MF08CESWW Manuel Du Propriétaire page 12

USE & OPERATION
Remote Control
All functions can be accessed only from the remote control.
Fan Speed Control
Auto, High, Medium, and Low
24 Hour On / Off Timer Control
In running mode:
Auto switch off
In stand-by mode:
Auto switch on
Press "+" or "-" button to adjust the
time setting for 1 hour intervals.
Note :
• Do not place the remote control in direct sunlight.
11
Power Control
ON / OFF
ON/OFF
Fan Speed
Timer
Mode Control
Press this button to change the operation
mode in the order of:
Cool
Fan
Note:
If the unit will be used mainly as a
dehumidifier, do not connect the exhaust
hose and let the warm air return in the room.
Continuous drainage is then necessary and
more efficient.
Mode
Up
Temperature / Timer Setting Controls
Down
• Used for adjusting the timer and
temperature.
• The default display on the indicator is room
temperature.
• When "+" or "-" key is pressed in cool
mode, the set temperature is displayed
and may be adjusted. After 5 seconds
the display will revert back to room
temperature.
• Temperature setting range is 61°F ~ 89°F.
• Timer setting range is 1-24 hours.
Dehumidify