Télécharger Imprimer la page

Hansgrohe AXOR Citterio 39460 1 Série Instructions De Montage / Mode D'emploi / Garantie page 7

Publicité

Installation / Installation / Instalación
1
English
Turn the water off at the
main before beginning!
Cut the plaster shield so that it
extends ⅜" above the surface of
the finished floor.
Remove the flush housing screws.
Do not discard the
screws!
Remove the flush housing.
1
2
Français
Avant de commencer,
fermez l'eau à la valve
principale!
Coupez le protecteur de façon à
ce qu'une partie de ⅜ po soit au-
dessus de la surface du plancher
fini.
Retirez les vis du compartiment
affleurant.
Ne jetez pas les vis!
Retirez le compartiment affleurant.
2
Español
Corte el protector de yeso de
modo que sobresalga ⅜" de la
superficie del acabado del piso.
Retire los tornillos del alojamiento
de descarga.
Retire el alojamiento de descarga.
8 mm
¡Cierre el paso del agua
en la entrada del sumin-
istro antes de comenzar!
¡No deseche los tornillos!
7

Publicité

loading