Bluetooth® Audio Playback; Music Playback Using Bluetooth Wireless; Technology; Pairing With The Unit (Initial Registration) - Pioneer X-HM51-K Mode D'emploi

10 Bluetooth® Audio playback
Chapter 10:
Bluetooth

Music playback using Bluetooth wireless

technology

Bluetooth wireless technology
Bluetooth wireless technology
Device not equipped with Bluetooth
Bluetooth
Music data
 STANDBY/ON
TIMER
INPUT
PHONES AUDIO IN
The unit is capable of playing back music stored on Bluetooth
capable devices (cell phones, digital music players etc.)
wirelessly. You can also use a Bluetooth audio transmitter
(sold separately) to enjoy music from devices that do not have
Bluetooth functionality. Please refer to the user's manual for
your Bluetooth capable device for more details.
®
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by PIONEER CORPORATION is under license. Other
trademarks and trade names are those of their respective
owners.
28
En
®
Audio playback
enabled device:
Cell phone
enabled device:
Digital music player
wireless technology:
Digital music player
+
® audio transmitter
(commercially available)
VOLUME
    

Pairing with the unit (Initial registration)

In order for the unit to playback music stored on a Bluetooth
capable device, pairing must first be performed. Pairing
should be performed when first using the unit with the
Bluetooth capable device, or when the pairing data on the
device has been erased for any reason.
Pairing is a step required to allow communication using
Bluetooth wireless technology to be carried out.
• Pairing is only performed the first time that you use the
unit and the Bluetooth capable device together.
• In order to allow communication using Bluetooth
wireless technology to take place, pairing must be
performed on both the unit and the Bluetooth capable
device.
• After pressing the BT AUDIO and switching to BT
AUDIO input, perform the pairing procedure on the
Bluetooth capable device. If pairing has been performed
correctly, you will not need to perform the pairing
procedures for the unit as shown below.
Please refer to the user's manual for your Bluetooth capable
device for more details.
1 Press the STANDBY/ON and turn the
power to the unit on.
2 Press the BT AUDIO.
The unit switches to BT AUDIO and PAIRING will be
displayed.
Turn on the power to the Bluetooth capable
3
device that you wish to pair with, and perform
pairing procedure on it.
Note
• This unit will be displayed as "X-HM51" on all Bluetooth
capable devices that you have.
Pairing will start.
• Place the Bluetooth capable device close to the unit.
• Please refer to the user's manual for your Bluetooth
capable device for details on when pairing can be
performed and the procedures required for pairing.
• When PIN code entry is requested, enter "0000." (This
unit does not accept any PIN code setting other than
"0000.")
Confirm on the Bluetooth capable device
4
that pairing has been completed.
If pairing with the Bluetooth capable device has been
completed correctly, the name of the Bluetooth capable
device will be displayed on the front panel of the unit. (Only
single-byte alphanumeric characters can be displayed. Any
character that cannot be displayed will be indicated by a "*".)