Sony Trinitron GDM-200PS Mode D'emploi page 14

Customizing Your Monitor
Select To
turn the moire cancellation function
"ON" or "OFF." CANCEL MOIRE
CANCEL MOIRE *
must be "ON" for "
ADJUST)" to appear on the screen.
adjust the degree of moire
ADJ
cancellation
MOIRE ADJUST
* Moire is a type of natural interference which produces soft or
wavy lines on your screen. It may appear due to interference
between the regulated pattern of the picture from the input
signal and the phosphor pitch pattern of the CRT.
Example of moire:
4 Press the >?// buttons to adjust the settings.
For Press
/ . . . to shift red shadows to the right
H CONVERGENCE
? . . . to shift red shadows to the left
/ . . . to shift red shadows up and blue
V CONVERGENCE
? . . . to shift red shadows down and
/ . . . to shift red shadows up and blue
TOP
shadows down
V CONVER TOP
? . . . to shift red shadows down and
14
ADJ (MOIRE
and blue shadows to the left
and blue shadows to the right
shadows down
blue shadows up
blue shadows up
For Press
BOT / . . . to shift red shadows up and blue
V CONVER BOTTOM
? . . . to shift red shadows down and
/ . . . to turn CANCEL MOIRE "ON"
CANCEL MOIRE
? . . . to turn CANCEL MOIRE "OFF"
/ or ? . . . to adjust the screen until the
ADJ
MOIRE ADJUST
Note
The picture may become fuzzy when CANCEL MOIRE is set to
"ON."
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
The selected item is reset to the factory setting.
shadows down
blue shadows up
OFF ON
OFF ON
moire is at a minimum
50