Method 2. Connecting Wirelessly; Connecting A Tv Via Bluetooth - Samsung HW-MS650 Mode D'emploi

Method 2. Connecting Wirelessly

Connecting a tV via bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one TV can be connected at a time.
the initial connection
1. Press the (Source) button on the right side panel or on the remote control, and then select
"bt".
2. Change "bt" to "bt PaIrInG".
• If "bt reaDy" appears, press and hold the
Soundbar or on the remote control for more than 5 seconds to display "bt PaIrInG".
3. Select Bluetooth mode on the TV. (For more information, see the TV's manual.)
4. Select "[aV] Samsung Soundbar MSxxx" from the list on TV's screen.
An available Soundbar is indicated with "need Pairing" or "Paired" on the TV Bluetooth device list.
To connect to the Soundbar, select the message and establish a connection.
• When the TV is connected, [tV name] → "bt" appears on the Soundbar's front display.
5. You can now hear TV sound from the Soundbar.
If the device fails to connect
• If the previously connected Soundbar listing (e.g. "[aV] Samsung Soundbar MSxxx") appears in the
list, delete it.
• In "bt" mode, press and hold the
panel of the Soundbar or on the remote control to switch to "bt PaIrInG" mode.
Then, select "[aV] Samsung Soundbar MSxxx" from the TV's search list.
What are the bt reaDy and bt PaIrInG statuses?
• bt reaDy : In this mode, you can search for previously connected TVs or connect to the Soundbar
from a previously connected mobile device.
• bt PaIrInG : In this mode, you can connect to a new device. (While in "bt" mode, press and hold the
(Source) button for more than 5 seconds on the right side of the Soundbar or on the remote
control.)
(Source) button on the right side panel of the
(Source) button for more than 5 seconds on the right side
ENG - 7