Auto Power Link; Method 2. Connecting Wirelessly; Connecting A Tv Via Bluetooth - Samsung HW-R47M Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Auto Power Link

Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the Left button on the remote control for 5 seconds to turn Auto Power
Link on or off.
• Auto Power Link is set to ON by default.
(To turn off this function, hold the Left button on the remote for 5 seconds.)
• Depending on the connected device, Auto Power Link may not function.
• This function is only available in the "D.IN" mode.

Method 2. Connecting Wirelessly

Connecting a TV via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one TV can be connected at a time.
The initial connection
1. Press the
PAIR button on the remote control to enter the "BT PAIRING" mode.
(OR)
a. Press the
"BT" changes to "BT READY" in a few seconds automatically if there is no Bluetooth device
connected to the Soundbar.
b. When "BT READY" appears, press and hold the
of the Soundbar for more than 5 seconds to display "BT PAIRING".
2. Select Bluetooth mode on the TV. (For more information, see the TV's manual.)
3. Select "[AV] Samsung Soundbar R4-Series" from the list on TV's screen.
An available Soundbar is indicated with "Need Pairing" or "Paired" on the TV's Bluetooth device
list. To connect the TV to the Soundbar, select the message, and then establish a connection.
• When the TV is connected, [TV Name] → "BT" appears on the Soundbar's front display.
4. You can now hear TV sound from the Soundbar.
(Source) button on the right side panel and then select "BT".
ENG - 12
OR
(Source) button on the right side panel

Publicité

Chapitres

Table des Matières
loading

Table des Matières