Pairing; What Is Pairing; Procedures Of Pairing - Sony DR-BT140Q Mode D'emploi

Pairing

What is pairing?

Bluetooth devices need to be
"paired" with each other
beforehand.
Once Bluetooth devices are paired,
there is no need for pairing again,
except in the following cases:
• Pairing information is deleted
after repair, etc.
• This unit is paired with 9 or more
devices.
This unit can be paired with up to
8 devices; if a new device is
paired after 8 devices have been
paired, the device whose latest
connection time is the oldest
among the 8 paired devices is
replaced by the new one.
• When recognition of the unit by
the device to be connected is
deleted.
• This unit is initialized (page 25).
All pairing information is deleted.
10
US

Procedures of pairing

1
Place the Bluetooth
device within 1 m (3 ft)
of this unit.
2
Press and hold the
PAIRING button for
2 seconds or more to
standby for pairing.
The indicator (blue) and
indicator (red) flash together and
the unit enters into pairing
mode.
Note
If pairing is not established within
about 5 minutes, pairing mode will be
cancelled and this unit will turn off.
In this case, start over from step 1.