Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Securing cut-off
1
2
► 1 . Base 2. Bolt holes
This tool should be bolted with two bolts to a level and
stable surface using the bolt holes provided in the tool's
base. This will help prevent tipping and possible per-
sonal injury.
FUNCTIONAL
DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
2
► 1 . Lock-off button 2. Switch trigger
CAUTION:
•
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided.
To start the tool, depress the lock-off button and pull the
switch trigger. Release the switch trigger to stop.
Spark guard
► 1 . Screw 2. Spark guard
The spark guard is factory-installed with its lower edge
contacting the base. Operating the tool in this position
will cause many sparks to fly around. Loosen the screw
and adjust the spark guard to a position at which mini-
mum sparks will fly around.
Stopper plate
1
► 1 . Stopper plate
The stopper plate prevents the cut-off wheel from con-
tacting the workbench or floor. When a new wheel is
installed, set the stopper plate to position (A). When the
wheel wears down to the extent that the lower portion
of the workpiece is left uncut, set the stopper plate to
position (B) to allow increased cutting capacity with a
worn down wheel.
4 ENGLISH
(B)
(A)
1
2
1
Publicité
