Other Connections; Connecting Auxiliary Components - Pioneer X-CM32BT-K Mode D'emploi

09

Other connections

Chapter 9:
Other connections
CAUTION
• Before making or changing the connections, switch off
the power and disconnect the power cord from the AC
outlet.

Connecting auxiliary components

Connect the front panel
auxiliary playback component.
• This method can be used to play music on this unit from
iPods/iPhones/iPads that do not support use of the iPod/
iPhone connector and USB terminal.
PHONES AUDIO IN
PHONES
Stereo mini-plug
cable (commercially
available)
1 Press AUDIO IN as the input source.
When AUDIO IN is selected, "AUDIO IN" is displayed on the
main display.
Note
• If the AUDIO IN
auxiliary phones jack, the volume of the unit will be
adjusted by the volume on the playback component. If
the sound is distorted after you lower the volume of the
unit, try lowering the volume on the auxiliary playback
component.
28
En
mini-plug jack to your
AUDIO IN
TIMER VOLUME
AUDIO IN
Portable audio player, etc.
mini-plug jack is connected to
Connect the rear panel LINE IN audio jacks to your auxiliary
playback component.
TV
M
OOP
M
NBAL 75 Ω
Audio cable
(commercially available)
1 Press AUDIO IN twice as the input source.
When LINE is selected, "LINE" is displayed on the main
display.
This unit's rear panel
SPEAKER
LINE
IN
R L
R