Cleaning And Storage - easymaxx H06 Mode D'emploi

EN
itself. The temperature which has been set most recent-
ly appears on the display, and the heating process is
started again.
7. Allow the device to cool down and disconnect it from the
mains.
Setting the Timer
You can set the operating time between 1 – 12 hours. The
device switches off automatically at the end of this time.
1. Switch the device on (see the "Use" chapter).
2. Press the timer button (7 or 14). "0" fl ashes on the
display (6). You can set the operating time for longer with
the + button (5 or 11) or shorter with the – button (9 or 12).
3. When the operating time is no longer visible on the display,
you can select the temperature and speed of the fan heater
(see above). After that the display switches between the
preset operating time and the temperature.
4. The device stops the heating process automatically after
the preset operating time has elapsed.

Cleaning and Storage

PLEASE NOTE!
■ Do not use any caustic or abrasive cleaning agents for
cleaning. These can damage the surface.
• If necessary, wipe down the device with a slightly damp
cloth.
• When not in use the device should be stored in a dry place
which is not accessible to children and animals.
26