Cleaning And Storage; Troubleshooting - easymaxx TS-21548 Mode D'emploi

To switch the device on again, press the Standby but-
ton on the remote control or any button on the device
itself. The display shows the current temperature. The
settings remain unchanged. Please note: If the de-
vice is switched on via the Menu button, the set tem-
perature fi rst fl ashes and then changes to the current
temperature.
7. Let the device cool down and unplug it from the wall socket.

Cleaning and storage

PLEASE NOTE!
■ Never use corrosive or abrasive cleaners for cleaning.
These can damage the surface.
• Wipe the device with a damp cloth as required.
• Keep the device in a clean, dry place, out of reach of chil-
dren and animals, during periods of non-use.

Troubleshooting

If the device does not function properly, fi rst check whether the
problem can be solved by yourself. If these steps do not solve
the problem, contact customer service.
Do not try to repair an electrical device yourself!
The device is not working.
• Is the power plug (3) correctly plugged into the socket?
Correct the fi t.
• Is the socket defective? Try another wall socket.
• Check the fuse of the mains connection.
27 EN