Video Connections; Connecting To The Component/Video Jack - Yamaha BD-A1010 Mode D'emploi

■ Connecting to the component/video jack

– You can enjoy accurate color reproduction and high quality images through the component jacks.
– Firmly connect a component video cable (commercially available) or a video pin cable to the COMPONENT jacks/
VIDEO jack.
– See page 36 for information on the video output formats.
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player
B
To component
input jacks
(Red)
(Blue)
(Green)
AV receiver
Notes
– If you play back the image via VCR, the image may deteriorate due to the copy guard function.
– To enjoy BD-3D discs on this Player, you need to connect an AV receiver, a TV, and this Player using HDMI
cables. Refer to the previous page.

VIDEO CONNECTIONS

To COMPONENT
jacks
Component video cable
(commercially available)
B'
COMPONENT IN
P
R
P
B
Y
TV
This Player
(Yellow)
To VIDEO
jack
Video pin cable
(supplied)
C
To video
input jack
(Yellow)
VIDEO
AV INPUT
AV receiver
2
C'
TV
13
En