Whirlpool W10837923A Guide D'utilisation Et D'entretien page 8

6.
Select TEMPERATURE
Once you select a cycle, select the desired wash temperature
by turning the Temperature knob to the appropriate setting
based on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Temperature
Hot
Some cold water is added to save
energy. This will be cooler than your hot
water heater setting.
Warm
Some cold water will be added, so this
will be cooler than what your previous
washer provided.
Cool
Warm water may be added to assist
in soil removal and to help dissolve
detergents.
Cold
This is the temperature from your faucet.
If your tap cold water is less than 50°F
(10°C), warm water may be added to
assist in soil removal and help dissolve
detergent.
Tap Cold
This is the temperature from your faucet.
8
7.
Press the Start button to start the wash cycle. When the
cycle has finished, the Done indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and avoid rusting of metal hooks, zippers,
and snaps.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light
soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Dark colors that
bleed or fade
Light soils
Press START to begin wash cycle