Cross Section Of The Cables; Connections - ALLTRONIC SEMIS T33 30 Manuel D'installation Et D'utilisation

C
ROSS SECTION OF THE CABLES
*
The cross sections shown in this table refer to a maximum length of 10 metres
** The maximum length of the cables for connection to the optional Battery Box is 3 metres
Note:
•
•
C
ONNECTIONS
The very first connection to be carried out is that of the protection conductor (earth cable), which must be
connected to the terminal marked PE. The UPS must not operate without being connected to an earthing
system
THE INPUT NEUTRAL MUST ALWAYS BE CONNECTED
DO NOT CONNECT THE OUTPUT NEUTRAL TO THE INPUT NEUTRAL
Note 1
Note 2:
Connecting the UPS to the Battery Box (optional)
Cross section of cables (mm
*
)
2