Use; Care And Cleaning - Electrolux IHSL1262CN Manuel D'utilisation

www.electrolux.com
6

2. USE

• The extractor hood has been de-
signed exclusively for domestic use
to eliminate kitchen smells.
• Never use the hood for purposes
other than for which it has been
designed.
• Never leave high naked flames un-
der the hood when it is in operation.
• Adjust the flame intensity to direct
it onto the bottom of the pan only,
making sure that it does not engulf
the sides.
• Deep fat fryers must be continuously
monitored during use: overheated
oil can burst into flames.

3. CARE AND CLEANING

Warning! The Silence Boost
Technology device is free of
maintenance.
- The Grease filters must be cleaned
every 2 months of operation, or
more frequently for particularly
heavy usage, and can be washed
in a dishwasher (Z).
Z
- Control lights, if present.
• Clean the hood using a damp cloth
and a neutral liquid detergent.
Caution: The connection to 200W
output has to be made by the builder,
by your after- sales service or, in any
case by a qualified person, in order
to avoid any kind of risk.
CALIBRATING THE
"ACTIVE NOISE" SYSTEM
AFTER COMPLETING INSTALLATION
AND CONNECTION TO THE POWER
SUPPLY THE SYSTEM MUST BE
CALIBRATED
• WARNING: Do not turn on the engine and
do not make noise during calibration.
• Press and hold button
• Calibration of the system takes 3 minuts,
during which "noises" will be heard.
• WARNING: After calibrating the system, test
all the hood functions.
Possible Anomalies in the "Active
Noise" system
• If during use the "Active Noise" system does
not work properly and makes strange noises,
contact the Service Department immediately.
• The hood can still be used by Disabling the
"Active Noise" system.
for 3 seconds.