Télécharger Imprimer la page

AEG DVE5960HW Notice D'utilisation page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
6
www.aeg.com
5. CONTROLS
The hood is fitted with a control panel with
aspiration speed selection control and a
light switch to control cooking area lights.
Use the high suction speed in cases
of concentrated kitchen vapours. It is
recommended that the cooker hood suction
1
Speed ON/OFF button
Control panel on/off key
2
Suction speed (power) key 1:
3
Suction speed (power) key 2:
Suction speed (power) key 3:
4
5
Suction speed (power) key 4:
Note: suction speed (power) key 4 has
a limited duration of 5 minutes, after
which the previous suction speed is
reactivated.
"Breeze" function key
6
(Room ventilation)
The hood switches on at low suction
speed (power) for 60 minutes, after
which it switches off.
Filter saturation control and
7
activation/deactivation key
Hob2
8
9
Lights ON/OFF key
T6 1
T2
2
T3
3
ood function indicator
H
is switched on for 5 minutes prior to cooking
and to leave in operation during cooking
and for another 15 minutes approximately
after terminating cooking.
The control switches are located on the
unit's front panel:
T4
4
T5
5
T6
6
Control panel on/off function
With the hood in standby, press key
led lights will switch off: the control panel
is off.
Press key
on: the control panel is active.
Carbon filter saturation control activation/
deactivation function
With the hood in standby, press key
longer than 3 seconds
Key
7
saturation filter has been activated.
Key
7
the carbon saturation filter has been
deactivated.
Filter saturation control and reset
function
At regular intervals and depending on
the hood temperature, key
up to indicate that the filters need to
be maintained in accordance with the
instructions in the relative paragraphs.
Key
required on the grease filters
Key
required on the carbon filter.
Filter saturation indicator reset
With the hood in standby, press key
longer than 3 seconds.
Repeat the operation if necessary.
T7
7
T8
8
1
again, all led lights will turn
will flash to indicate that the carbon
will remain lit to indicate that
7
on with a fixed light: maintenance is
7
on and flashing: maintenance is
T9
9
1
, all
5
for
7
lights
7
for

Publicité

loading

Ce manuel est également adapté pour:

Dve5960hbDve5960dhb