Hartke KICKBACK HS1200 BASS COMBO Mode D'emploi page 12

Using Equalization
In many instances, the best way to deal with equalization is to think in terms of which
frequency areas you need to attenuate, as opposed to which ones you need to boost.
Be aware that boosting a frequency area also has the effect of boosting the overall
signal; specifically, too much Low EQ boost can actually cause overload distortion or
even harm a connected speaker.
The specific EQ you will apply to your bass signal is very much dependent upon your
particular instrument and personal taste and playing style. However, here are a few
general suggestions:
• For that super-deep reggae or Motown sound, boost the Low EQ slightly while
attenuating the High control (leave the Mid control flat or slightly attenuated):
• To remove boxiness and make your instrument sound more "hi-fi, " try attenuating the
Mid frequency control while leaving the Low and High settings flat: Using
Equalization
12