Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Intended Use
The YDO01SW-... data output port
is designed for installation in Signum
SIW... complete scales as an optional
standard COM1 interface or/and
UniCOM universal data interface.
For UniCOM:
- YDP01SW-232 (Option A1):
- Connecting Alibi memory
- YBT01 Bluetooth adapter
- YRD02Z secondary display unit
- USB adapter cable for connecting
a PC using USB YCC01-USBM2
nd
- 2
weighing platform: Reference
scale with an RS-232 data output port
nd
- 2
weighing platform: IS platform
with optional RS-232 data output port
- YDO01SW-485/422 (Option A2):
bidirectional RS-422 data interface for
point-to-point-connection using the
SMA/SBI/xBPI protocol
- YDO01SW-485/422 (Option A3):
Bidirectional RS-485 data interface
for networking with up to 32 scales in
an XBPI bus, additional IS platform
with standard RS-485 data output port.
- YDO01SW-AO (Option A9):
Analog output port, optionally utilizable
as a current interface (0/4 - 20 mA,
0 - 24 mA) or as a voltage interface
(0 to 10 V).
Module YDO01SW-AO facilitates the
connection of a PLC or external analog
display unit.
- YDO01SW-DIO (Option A5):
Digital input/output module for
connecting Signum to external controls.
- YDO01SW-ETH (Option B9):
Ethernet interface (e.g. for connecting
to a PLC or PC).
- YDO01SW-DP (Option B1):
Profibus DP interface (slave) for field
bus applications (e.g. connecting to
a PLC).
Contents
8 YDO01SW-485/422
13 DSUB9 Connector (Profibus)
13 PS/2 Port
Key to Symbols
The following symbols are used in
these instructions:
§
Indicates required operational steps
$
Indicates operational steps only
required under certain conditions
>
Describes what happens after a certain
operation has been performed
!
Indicates a hazard
3 3
Publicité
Chapitres
Table des Matières
